A work light and a utility cutter in one 148g tool.
Lighting, cutting, detection, pointing and an emergency glass breaker, built for warehouse, maintenance and inspection work.
- Up to 1,800 lumens, with up to 220m of reach on the spotlight beam
- Built-in 1,500mAh battery, USB-C charging in about 1h 15min
- Up to 270 hours on the 1-lumen ULTRALOW level
- IP67 dust and water rating, impact resistant to 1m
- Aerospace-grade aluminium body with stainless steel wear parts
WHY THE UTL19 OVER A STANDARD WORK LIGHT
Colours that look right
A neutral white beam with a tint deviation below 0.005, so wire colours, labels and stains read true, even at low output.
Three beams from one LED
Spotlight, floodlight and mixed light, so the same tool reads a label at the end of an aisle and lights up a whole workbench.
UV and a green laser built in
A 365nm UV light shows up leaks and markings, and a green laser points out a target from across the room.
Easy to find in the dark
Glow locators give off a soft glow, so the tool is quick to spot in a toolbox, on a bench or under a car seat.
Open the delivery, trim the strapping, keep the light on.
Press the blade slider and the 60mm utility blade extends to the length you need, then retracts back into the body. It handles parcels, film, tape and light material trimming.
The blade lock holds it retracted when the tool goes into a pocket or bag, and a dull blade is quick to replace with a fresh one.
Light the whole loading bay, or reach to the far end of it.
On floodlight, HIGH puts out 1,800 lumens across a wide area, enough to work a container, a plant room or a car park at night.
Switch to the spotlight and the beam tightens to 12,100cd, reaching 220 metres to pick out a pallet label or a figure at the end of a long aisle.
Pick the beam that suits the job.
Spotlight is for distant detail and corridor checks. Floodlight spreads even light over a bench or an open control panel. Mixed light covers near and far at once, which suits walking a site or moving stock.
Double-press and hold the M button to cycle the patterns. The UTL19 remembers your choice and applies it to LOW, MID and HIGH.
Pure white light that shows true colours.
The NiteLab M515S LED holds that neutral tint (Duv below 0.005) at every brightness level, closer to daylight than the blue or green cast many work lights give.
A precision metal orange peel reflector shapes it into a beam with both range and width, and a constant current circuit keeps the output stable.
Reveal what white light hides.
The UV light runs at 365 to 375nm with three power levels, from 200mW up to 1,350mW. It makes fluorescent traces stand out, which helps with document checks, leak detection and hygiene inspections.
At 200mW it runs for up to 15 hours, long enough for a full round of checks.
Point it out from across the site.
The green laser has three power levels and puts a bright, precise dot on the exact pipe, shelf or fault you mean. It's quicker than describing it over the noise of a worksite.
Press and hold the M button for instant laser, even with the white light or UV already on.
An emergency glass breaker in the bezel.
The stainless steel strike bezel carries high-hardness silicon nitride ceramic tips, built to break glass quickly if you are ever trapped in a vehicle.
It adds a real reason to keep one in the glovebox, alongside the light.
A slide switch for brightness, one button for everything else.
Slide forward to switch on and keep sliding to step through the brightness levels. A short press of the M button moves between white light, green laser and UV, and the tool remembers the last one you used.
Run white light or UV together with the laser, or hold the M button while sliding on for a 1-lumen ULTRALOW that's easy on night-adjusted eyes.
Charged over lunch, ready for the next shift.
The built-in 1,500mAh battery tops up through a covered USB-C port in about 1 hour 15 minutes from a 5V/2A adapter. Four green indicators show the remaining charge at a press of the M button.
Runtime stretches from 1 hour 15 minutes on full floodlight to 9 hours at 80 lumens, so it lasts the working day on the lower levels.
Built for the knocks of daily work.
The body is aerospace-grade aluminium with a Type III hard-anodised finish, and six high-wear parts, including the switches, blade slider and bezel, are PVD-finished stainless steel.
Rated IP67 for dust and water and tested to survive a 1 metre drop, it shrugs off a tropical downpour on site or a fall off the tailgate.
Rides low on a pocket, belt or pack strap.
The stainless steel deep-carry clip keeps the tool low and secure on a work trouser pocket, a belt or a backpack strap while you move around site.
The glow locators contain no tritium or radioactive material. They run off a tiny UV source for about 24 months of standby, and you can switch them off.
WHO USES THE UTL19
Warehouse & Logistics
Picking, receiving and late shifts among the racking, with one tool on the belt.
Maintenance & Facilities
Plant rooms, ceiling voids and control panels, from routine checks to call-outs.
Inspection & Security
Night rounds, stock audits and document checks on every shift.
Vehicle & Home Kit
A bright light and a way out of a car, ready in the glovebox or the toolbox.
OUTPUT AND RUNTIME
| MODE | OUTPUT | RUNTIME | DISTANCE | INTENSITY |
| Floodlight | ||||
| High | 1,800 lm | 1h 15min | 180 m | 8,100 cd |
| Mid | 400 lm | 2h | 80 m | 1,600 cd |
| Low | 80 lm | 9h | 30 m | 225 cd |
| Ultralow | 1 lm | 270h | 4 m | 4 cd |
| Mixed light | ||||
| High | 1,200 lm | 1h 30min | 200 m | 10,000 cd |
| Mid | 400 lm | 2h | 110 m | 3,025 cd |
| Low | 80 lm | 9h | 50 m | 625 cd |
| Spotlight | ||||
| High | 800 lm | 1h 45min | 220 m | 12,100 cd |
| Mid | 330 lm | 2h | 135 m | 4,556 cd |
| Low | 80 lm | 9h | 70 m | 1,225 cd |
| UV light | ||||
| Level 3 | 1,350 mW | 3h | - | - |
| Level 2 | 600 mW | 5h | - | - |
| Level 1 | 200 mW | 15h | - | - |
| Green laser | ||||
| Level 3 | < 5 mW | 60h | - | - |
| Level 2 | < 2 mW | 130h | - | - |
| Level 1 | < 0.39 mW | 210h | - | - |
Tested to ANSI/PLATO FL 1-2019
Measured with the built-in 1,500mAh battery at 26°C in the Nitecore lab, to the international ANSI/PLATO FL 1-2019 flashlight standard. Real-world results vary with conditions.TECHNICAL SPECIFICATIONS
| LED | NiteLab M515S |
| Max Output | 1,800 lumens (floodlight) |
| Max Throw | 220 m (spotlight) |
| Peak Intensity | 12,100 cd |
| Tint | Duv < 0.005 |
| UV Light | 365–375 nm, 200–1,350 mW, IEC 62471 Risk Group 1 |
| Green Laser | 510–530 nm, < 5 mW, Class 3R (IEC 60825-1) |
| Battery | Built-in 1,500mAh Li-ion |
| Charging | USB-C, approx. 1h 15min (5V/2A) |
| Blade | 60 × 19 × 0.6 mm, 50° cutting angle, replaceable |
| Body | Aerospace-grade aluminium alloy (Type III hard-anodised) and stainless steel (PVD) |
| Water Resistance | IP67 |
| Impact Resistance | 1 m |
| Dimensions | 129 × 39 × 27 mm (19 mm thick without clip and blade slider) |
| Weight | 148 g (accessories not included) |
| Manual | Download Instruction Manual (PDF) |
FREQUENTLY ASKED QUESTIONS
Does the blade come fitted?
The blade ships separately in the box and the blade lock is engaged from the factory. Slide the blade lock switch to unlock, extend the holder, hold down the release latch and slide the blade in until it seats. Give it a gentle tug to check it's secure.
Can I use it while it charges, and will it hold charge in a drawer?
Yes, it works normally while plugged in. Fully charged, it holds for about 24 months on standby, and Nitecore recommends a top-up every six months if it sits unused.
Are the UV light and laser safe to use?
Used as intended, yes. The UV light is rated Risk Group 1 (low risk) and the green laser is Class 3R. Never look into either or aim them at people or reflective surfaces, and keep the tool away from children. It is intended for adults aged 18 and over.
What's In The Box
- 1× Nitecore UTL19 - utility tool and light, with stainless steel pocket clip
- 1× Utility Blade - ships separately, ready to install
- 1× USB-C Charging Cable
- 1× Lanyard
Light, cutter and backup in one hand.
GET YOUR UTL19 NOWYou’re Backed by Our 60-Day Ironclad Guarantee
 |
 |
Try it for 60 days. If it’s not right for you, send it back.
We stand behind our gear. If you’re not happy with your purchase, just return the full package within 60 days and we’ll issue a full refund—no fuss, no forms, no hoops to jump through.
What Happens After You Order
- You’ll get an instant order confirmation email with your receipt.
- We’ll pack your order the next working day and send you a tracking number once it’s on the way.
- From the moment you order to the moment it reaches your hands, we’re here to keep you updated and supported.
When will I receive my gear?
- Singapore: Delivered to your doorstep in 4–6 working days.
- International: Arrive within 10–14 working days.
Returns and warranty
- Every product comes with a 1 to 3-year replacement warranty (depending on the item).
- If anything isn’t working right, just let us know. We’ll make it right.
FREE Gift with Purchase: Limited Edition Ember Shard Whistle
Spend $99 or more today, and we'll automatically include a limited-edition Glow-in-the-Dark Ember Shard Whistle when packing your order.
Charge it quickly under sunlight or your flashlight, and enjoy its subtle glow throughout the night—perfect for marking gear, emergency kits, or attaching to your bag.
Limited quantities. These will be swapped (at our discretion) to other gift items if shards are unavailable.
Products related to this item
Recently viewed
Get help choosing the perfect light for your task, and have it delivered on the same day!
If you can't find what you are looking for, or need delivery on a specific date, WhatsApp us below.